2025 Chevrolet LCF 4500 Crew Cab RWD Harbor Contractor Truck
Stock #SS203798
Vehicle Notes
This 2025 Chevrolet 4500 HG LCF Gas in Arc White comes with the following features: 6.6L V8 8-Speed Automatic RWD Preferred Equipment Group 1WT, 19.5 …
Read More…
Read More…
Chassis Details
Stock Number
SS203798
Stock Type
New
Year
2025
Make
Chevrolet
Model
LCF 4500
Class
4
GVWR
14,500
Drivetrain
RWD
Cab Type
Crew
Vehicle VIN
54DCDJ1D5SS203798
Interior Color
Medium Ash Gray, Cloth seat trim
Seating Capacity
7
Exterior Color Description
Arc White
Engine Cylinder Count
8
Engine
ENGINE GAS, 8 CYL, 6.6L, SIDI, VVT, CAST IRON
Transmission Type
Automatic
Fuel Type
Gasoline
Engine Model
L8T
Engine Size (L)
6.6
Horsepower
350
Brake Type
Hydraulic
Vehicle Options
- Audio system feature, 2 speakers
- Tires, front, 225/70R19.5 G, LRR (low rolling resistance) tubeless steel belted radial, all-season
- Vehicle Application Truck
- Seat, front high back bucket driver and passenger tricot cloth covered reclining high back driver seat with single two-occupant fold down passenger seat (STD)
- Lighting, interior dome
- Windshield washer bottle access on passenger side dash when passenger-side door is open
- Wheelbase, 176" (447.0 cm)
- Air conditioning, single-zone manual, integral in-dash mounted
- Transmission, 8-speed automatic, 8L90 (STD)
- Emissions, 50 state certification
- Incomplete vehicle certification
- Rear axle, 4.10 ratio
- Steering column, Tilt-Wheel
- Windshield wiper, pulse, wet arm
- Steering wheel, urethane
- Drivetrain, rear-wheel drive
- Floor mats
- Grille, Silver
- Windows, power
- Tires, rear, 225/70R19.5 G, LRR (low rolling resistance) tubeless steel belted radial, all-season
- GVWR, 14,500 lbs. (6577 kg)
- Wheels, 19.5" x 6", K steel (STD)
- Exhaust, single outlet
- Frame, ladder-type channel frame. Full C section straight frame 33.5" (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
- Audio System, AM/FM stereo with CD player, auxiliary jack, USB port and Bluetooth (STD)
- Brake, parking, cable actuated, internal expanding drum type, transmission-mounted
- Cup holders
- Daytime Running Lamps
- Rear suspension, 12,900 lbs. (5851 kg), multi-leaf, semi-elliptical steel alloy. Includes shock absorbers
- Cruise control, electronic, automatic
- Battery, 750 cold-cranking amps, 12-volt single, maintenance free, frame-mounted battery box
- LED Headlamps
- Assist steps
- Fuel tank, 38.6 Gallon, (146L), rectangular fuel tank mounted between frame rail with electric type fuel pump (mounted in tank). Through the rail fuel fill.
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead valve water cooled 6.6L SIDI V8 350 hp [261 kW] @ 4500 rpm, 425 lb.-ft of torque [575.8 N-m] @ 3800 rpm. Electronically controlled direct fuel injection. Six bolt main cap design for heavy-duty performance. Engine Control Module (ECM) and Transmission Control Module (TCM) engine control system. Engine cruise control, engine oil cooler, High Idle Mode (1200 rpm). (STD)
- Seat trim, Cloth
- Storage, door pockets
- Storage, seatback pockets
- Driver Information Center
- Glass, tinted
- Door locks, power
- Brakes, 4-wheel antilock, front and rear disc
- Front axle, 6,830 lbs. (3098 kg), reverse Elliot "I"-beam includes integral hydraulic power steering, with an 18.8-20.9:1 gear ratio
- Audio System, AM/FM stereo with CD player, auxiliary jack, USB port and Bluetooth
- Medium Ash Gray, Cloth seat trim
- Wheels, 19.5" x 6", K steel
- PIO, Mirror, outside left-hand and right-hand with integral convex mirrors, heated, dual remote controls
- Arc White
- Preferred Equipment Group
- Transmission, 8-speed automatic, 8L90
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead
- Seat, front high back bucket driver and passenger
- PIO, Remote Keyless Entry
- 50-STATE EMISSION
- 38.6 GALLON FUEL TANK
- View All
Body Details
Manufacturer
Body Type
Contractor Truck
Body Line
Standard Contractor Body
Body Model
HTCO19296
Body Material
Steel
Body Width
96"
Body Length
16'
Body Color
White
Floor Description
Diamond Plate
Floor Material
Steel
Hitch Type
Receiver
Hitch Class
V
Toolbox Type
Under Body
Toolbox Quantity
2
Toolbox Height
18"
Toolbox Length
60"
Toolbox Depth
18"
Bulkhead Description
Straight Steel Top
Bulkhead Height
50"
Bulkhead Width
8"
Camera Description
Backup Camera
Ladder Rack Description
Straight Leg Rack with Swing Front Bar
Standard Contractor Body Features
Nearly half a century of cutting edge engineering has created this Standard Contractor model. But there is nothing standard about it! Our flawless well integrated overall design now comes with optional diamond plate steel or extruded aluminum decks and rear fold-down gates. It’s powder-coated head to toe. WOW!
- Standard Features:
- Side loader rack with extra heavy duty 4x2 longitudinal bars that drop down 4-inches, meaning you can easily carry ladders, forms, or scaffolding.
- Top deck mounted boxes, addressing a wide variety of storage needs.
- Gates that fold down in the rear that creates both a work platform and an ease of loading and unloading of equipment into the bed area.
- Dividable deck area between the space between the boxes, for heavy machinery such as compressors or welders, and the rear platform, for bags of concrete or a wheel barrel.
- Stainless steel rear apron mounted between the dock bumper uprights , hiding the unsightly under-deck clutter.
Disclaimer:
New vehicle pricing includes all offers and incentives. Tax, Title and Tags not included in vehicle prices shown and must be paid by the purchaser. While great effort is made to ensure the accuracy of the information on this site, errors do occur so please verify information with a customer service rep.
**With approved credit. Terms may vary. Monthly payments are only estimates derived from the vehicle price with a 72 month term, 4.9% interest and 20% downpayment.
**With approved credit. Terms may vary. Monthly payments are only estimates derived from the vehicle price with a 72 month term, 4.9% interest and 20% downpayment.